 |
| Production Automation of Mine |
|
| Links |
| |
|
 |
|
|
 |
The system has functions of detecting current location and running direction of vehicles in mine underground; |
 |
Equipped with monitoring and control device on the vehicle, the system can monitor running status of vehicle including water temperature, surface temperature, exhaust temperature, oil pressure, water level, vehicle speed, mileage and methane, and upload the parameters to surface monitoring and control host in realtime; |
 |
The system can realize automatic distributed dispatching and control of vehicles separating from surface monitoring and control host, and dispatching and control outstation can automatically control running signal of vehicle, insuring safe and unhindered running of vehicles in mine underground; |
 |
The system has function of prior manual dispatching and control of vehicle, and the surface dispatcher can manage vehicles by manually control running signal of vehicle in mine underground with software; |
 |
The system software can analyze condition parameters of each point recorded by monitoring and control device when vehicle has failure, and then give reference for vehicle maintenance; |
 |
The system has function of animated demonstrating of actual status of vehicles in mine underground and replay running track of vehicles in certain time; |
 |
The system has functions of failure alarm, historical record checking, form creation and printing. |
|
 |
System Capacity: 32 dispatching and control outstations, 512 location outstations, 255 identification cards or locomotive monitoring and control devices |
 |
Transmission Mode
Optical fiber transmission between photoelectric transducer and surface data interface box with rate 100 M/10M
CAN Bus transmission between photoelectric transducer and dispatching and control outstation with rate 5 000 bit/s, maximum distance 2 km
RS485 Bus transmission between dispatching and control outstation and location outstation with rate 4 800 bit/s, maximum distance 2 km |
 |
Valid wireless communication radius between location outstation and identification card or locomotive monitoring and control device is  15 m, max. speed of locomotive is  36 km/h |
 |
Radio Frequency Signal:
GFSK modulation
Central Frequency: (2 402  4) MHz |
|
|